Sanyo PLC-XF45 Bedienungsanleitung PDF herunterladen (Seite 29)

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your

computer. Auto PC Adjustment function can be operated as follows.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

ADJUST Menu icon.

Press POINT DOWN button to move a red frame pointer to

AUTO PC Adj. icon and then press SELECT button twice.

This Auto PC Adjustment can be also executed by pressing

AUTO PC ADJ. button on Side Control or on Remote Control

Unit.

Move a red frame pointer to AUTO PC

Adj. icon and press SELECT button.

PC ADJUST MENU

Auto PC Adj.

PC ADJUST Menu icon

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized

in this projector. Once parameters are memorized, setting can be

done just by selecting Mode in PC SYSTEM Menu (P26). Refer to

step 3 of MANUAL PC ADJUSTMENT section (P30).

NOTE

● Fine sync, Total dots and Picture Position of some computers can

not be fully adjusted with this Auto PC Adjustment function. When

image is not provided properly through this function, manual

adjustments are required. (Refer to page 30, 31.)

● Auto PC Adjustment function cannot be operated in Digital Signal

input on DVI terminal and “RGB”, “480p”, “575p”, “720p (HDTV)”,

“1035i (HDTV)”, “1080i50 (HDTV)” or “1080i60 (HDTV)” is selected

on PC SYSTEM Menu (P27).

COMPUTER INPUT

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Keine Kommentare

Sanyo PLC-XF45 Bedienungsanleitung Seite 29