Sanyo MDF-593 Bedienungsanleitung PDF herunterladen (Seite 18)

OPERATING INSTRUCTIONS

Alarm temperature setting

This unit is provided with the high temperature alarm. The setting of high temperature alarm is 10

C or

C (The setting value is 2 kinds.) higher than the setting of chamber temperature. The procedure in

table 2 shows the sequence to set the high temperature alarm at 15

C higher than the setting of chamber

temperature. Set the figure to 000 at step 5 when setting the high temperature alarm at 10

C higher

than the setting of chamber temperature.

Note:

The alarm temperature is set at the factory 10

C higher than the setting of chamber temperature.

Table 2. High temperature alarm setting (15

C higher than the setting of chamber temperature)

Description of operation Key operated Indication after operation

1 -----

The current chamber temperature is

displayed.

Press the numerical value shift key

for about 5 seconds.

The first digit blinks.

Set the first digit to 1 with the

numerical value shift key.

The first digit blinks.

4 Press ENT key. ENT The first digit blinks.

Set the first digit to 1 with the

numerical value shift key.

When pressed, the figure of settable

digit changes.

6 Press ENT key. ENT

Alarm temperature is memorized and

the current chamber temperature

is displayed.

Note: The setting is not memorized if the mode change key (PV/SV) is pressed during alarm

temperature setting. The chamber temperature is displayed for 3 seconds when the numerical value

shift is pressed 5 times continuously.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Keine Kommentare

Sanyo MDF-593 Bedienungsanleitung Seite 18