Sanyo CH1872 Bedienungsanleitung PDF herunterladen (Seite 83)

Care and Cleaning (continued)

Anti-Mold Filter The anti-mold filter behind the air intake grille should be checked and cleaned at

least once every two weeks.

How to remove the anti-mold

filter

1. Grasp both ends of the air

intake grille, and remove it by

opening towards the front and

pulling towards you.

2. Remove the anti-mold filter

attached to the rear of the air

intake grille.

Cleaning Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter,

wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it.

How to replace the anti-mold

filter

1. With the FRONT mark of the

anti-mold filter at the front,

align the two indentions near

the mark with the hooks at the

rear of the air intake grille, and

then mount the anti-mold filter.

2. Allow the edge of the air intake

grille to slide into the top of the

indoor unit, and then insert it

all the way inside.

3. To attach the air intake grille to

the indoor unit, press its

bottom right and left corners as

well as its bottom center into

place.

Attach so that the round pins at the top right and left corners of the air intake grille

are inserted into the grooves at the top right and left of the indoor unit.

Air intake grille

Anti-mold filter

FRONT mark

Hook

Air intake grille

Groove

Air intake grille

NOTE

OI-801-23EG

01_KHS1872_EN.fm Page 23 Monday, July 9, 2007 3:05 PM

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 110 111

Kommentare zu diesen Handbüchern

Keine Kommentare

Sanyo CH1872 Bedienungsanleitung Seite 83

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobile Klimaanlagen Sanyo CH1872