Sanyo DSR-3016 Bedienungsanleitung PDF herunterladen (Seite 12)

BUILT-IN HARD DISK

Hard disk

Recording areas

The recording areas on the hard disk (normal recording area: 80%,

alarm recording area: 19%, archive area: 1%) are established

automatically when the power for the digital video recorder is turned

on. Images are recorded in the normal recording area when the

REC/STOP button is pressed, and they are recorded in the alarm

recording area when an alarm occurs. This is called the default

condition, and the following detailed settings can be confirmed in the

sections on “RECORDING IMAGES IN THE NORMAL RECORDING

AREA” and “RECORDING IMAGES IN THE ALARM RECORDING

AREA” (See page 22.) which are explained later. Furthermore,

settings such as the recording areas and picture quality can be

changed using the menu screens.

A Normal recording area

•

••

•

When the REC/STOP button is pressed while monitoring is in

progress, images are recorded in the normal recording area.

•

••

•

When start and end times are entered for each day of the week

and are then enabled, timer recording is automatically carried out

in the normal recording area between the times that have been set.

B Alarm recording area

ALARM REC MODE SET menu settings are required.

•

••

•

Alarm recording is enabled when ALARM RECORDING is set.

When a suspicious person is detected by the switch or motion

sensor that is connected to the alarm input terminal, an alarm is

recorded in the alarm recording area.

•

••

•

Pre-alarm recording is enabled when PRE-ALARM RECORDING

is set. Pre-alarm recording repeatedly records the same images as

for normal recording in the alarm recording area, and overwrites

these images after the set time interval, until an alarm is detected.

When pre-alarm recording is set, the image immediately before an

alarm occurred can be recorded.

C Archive area

This is the area for copying important images from the normal

recording area and the alarm recording area. The size of the archive

area can be set to a maximum of 10 GB (12.5% of total capacity when

using an 80-GB hard disk 6% of total capacity when using an 160-GB

hard disk) by changing the size of the normal recording area or the

alarm recording area.

Archive areaC

Normal recording areaNormal recording areaA

Alarm

recording

area

Alarm

recording

area

Hard disk recording areas

80%

19%

80%

19%

Menu screen (initial setting)

This can be displayed by pressing the MENU button.

PICTURE QUALITY: NORMAL

Picture quality can be selected from five options.

(The recording speed changes in accordance with the picture

quality selected.)

AUDIO RECORDING: Can be set to ON or OFF.

REC RATE: Shows the recording interval and the

recording time.

Refer to the recording speed table for further details.

ALARM RECORDING: Can be set to ON or OFF.

When alarm recordings are to be made, select a setting such

as ENABLED for the OFF setting. The recording speed and

alarm duration will be displayed

Setting screen for normal recording area picture quality,

recording speed, etc.

Setting screen for alarm recording area picture quality,

recording speed, etc.

TOTAL CAPACITY : 80GB

NORMAL RECORDING AREA : 80 %

AREA FULL RESET ->

ALARM RECORDING AREA : 19 %

AREA FULL RESET ->

ARCHIVE AREA : 1 %

AREA FULL RESET ->

CAUTION : WHEN THE AREA SETTING IS CHANGED,

THE WHOLE AREA WILL BE INITIALIZED !

PICTURE QUALITY : NORMAL

AUDIO RECORDING : ON

REC RATE : 10FPS ( 57H)

REC CAMERA GROUP : OFF

PICTURE QUALITY : SUPER FINE

AUDIO RECORDING : ON

ALARM RECORDING : ENABLED

ALARM INTERLEAVE : ONLY

PROGRAM GROUP : OFF

REC RATE :@ 0.1FPS, DURATION: 40SEC

PRE-ALARM RECORDING : ON

REC RATE :@ **** FPS, DURATION: ***

=> (01010 ALARMS CAN BE RECORDED )

ALARM TRIGGER : ALARM

English

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Sanyo DSR-3016 Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto DVR Sanyo DSR-3016