Sanyo DSR-3016 Bedienungsanleitung PDF herunterladen (Seite 63)

RECORDING SETTING

Pre-alarm recording setting

Use the jog dial to move the cursor to ALARM RECORDING,

and then turn the shuttle dial clockwise.

“OFF” flashes.

Use the jog dial to change the “ OFF” setting to some other

mode (example: ENABLED), and then turn the shuttle dial

clockwise.

The PRE-ALARM RECORDING setting changes from “ ” to

“OFF”.

The cursor moves to REC RATE.

Use the jog dial to move the cursor to PRE-ALARM

RECORDING, and then turn the shuttle dial clockwise.

“OFF” flashes.

Use the jog dial to change from “ OFF” to “ ON” , and then turn

the shuttle dial clockwise.

The cursor moves to REC RATE.

Turn the shuttle dial clockwise, use the jog dial to set the

recording speed (example: “ A0.2” ), and then turn the shuttle

dial clockwise.

The cursor moves to the “2SEC” setting for DURATION and

flashes.

Use the jog dial to set the recording time duration (example:

“ 5SEC” ), and then turn the shuttle dial clockwise.

The cursor moves to ALARM TRIGGER.

Use the jog dial to move the cursor to PROGRAM GROUP,

turn the shuttle dial clockwise, use the jog dial to set the

program number (example: “ P-1"), and then turn the shuttle

dial clockwise.

The cursor moves to REC RATE.

Display examples:

•

OFF: Pre-alarm images from all cameras are recorded at the

same recording speed.

•

P-1: When program no. 1 is recorded

•

P-2: When program no. 2 is recorded

•

P-3: When program no. 3 is recorded

•

P-4: When program no. 4 is recorded

Note: When pre-alarm recording has been set, the pre-alarm

recording speed and the recording speed for normal recording

will be fixed at 15 FPS. A warning screen appears to verify

confirm this, so select “YES”.

Press the EXIT/OSD button.

The display returns to the normal screen.

“PRE” appears in the operating display section. When an alarm is

triggered, the display switches to “ALARM”.

Note:

•

Pre-alarm recording continues for the length of time specified by

the DURATION setting before an alarm signal is input. When

playing back images that have been recorded during pre-alarm

recording, use the alarm search (SEARCH button) operations.

Images will be played back from the point that the alarm occurred,

so use the shuttle operations to carry out rewind playback.

•

If carrying out normal alarm recording and pre-alarm recording at

the same time, no audio signals will be recorded with the

pre-alarm recording images.

PICTURE QUALITY : SUPER FINE

AUDIO RECORDING : ON

ALARM RECORDING : ENABLED

ALARM INTERLEAVE : SW

PROGRAM GROUP : OFF

REC RATE: @ 10FPS, DURATION: 5SEC

PRE-ALARM RECORDING : ON

REC RATE: @ **** FPS, DURATION: ***

=> (01010 ALARMS CAN BE RECORDED )

ALARM TRIGGER : ALARM

CO G

ALARM INTERLEAVE : ONLY

PROGRAM GROUP : OFF

REC RATE: @ 10FPS, DURATION: 40SEC

PRE-ALARM RECORDING : ON

REC RATE: @ **** FPS, DURATION: ***

=> (01010 ALARMS CAN BE RECORDED )

ALARM TRIGGER : ALARM

ALARM

RECORDING

ENABLED

ALARM INTERLEAVE : ONLY

PROGRAM GROUP : OFF

REC RATE: @ 10FPS, DURATION: 5SEC

PRE-ALARM RECORDING : ON

REC RATE: @ 0.2FPS, DURATION: 5

=> (01010 ALARMS CAN BE RECORDED )

ALARM TRIGGER : ALARM

EXIT/OSD

PRE 0000 SF 01-01-02 06:46:15

English

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Sanyo DSR-3016 Bedienungsanleitung Seite 63

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto DVR Sanyo DSR-3016