Sanyo DSR-3016 Bedienungsanleitung PDF herunterladen (Seite 6)

PART NAMES

Front panel

POWER indicator

•

Illuminates (red) when the power cord plug is inserted into a

wall outlet.

•

Flashes when there is a problem with the internal hard disk or

fan.

FULL indicator

Flashes when overwriting is set to off and the remaining space in

the normal recording area of the hard disk drops to 1%*.

In addition, if the amount of remaining space in the recording area

drops to 0%, recording stops and the indicator stops flashing and

illuminates steadily. If the “AREA FULL RESET” command in the

main menu (See page 51.) is used, the indicator will switch off.

(* This can be changed using the menu settings.)

ALARM FULL indicator

Flashes when overwriting is set to off and the remaining space in

the alarm recording area of the hard disk drops to 1%*.

In addition, if the amount of remaining space in the recording area

drops to 0%, recording stops and the indicator stops flashing and

illuminates steadily. If the “AREA FULL RESET” command in the

main menu (See page 51.) is used, the indicator will switch off.

(* This can be changed using the menu settings.)

LOCK indicator

Illuminates when the security lock is engaged using the menu and

operations are locked.

If a button is pressed while the lock is engaged, the buzzer

sounds. The indicator will flash at this time and the password entry

screen will be displayed on the monitor.

ALARM indicator

Illuminates during pre-alarm recording.

Flashes during alarm recording.

Camera select buttons and indicators

When a camera is connected to one of the camera video input

(CAMERA IN) connectors at the rear of the digital video recorder

and the corresponding button is pressed, the indicator illuminates

and images from that camera are displayed.

(Indicators)

•

During split-screen monitoring, the indicators for all of the

cameras being displayed in the split-screen illuminate.

•

When there is alarm input, the indicator for the alarm input

camera flashes.

4-screen display button and indicator (QUAD)

This button lets you switch the display to a 4-screen display while

monitoring is being carried out using a single-screen, 16-screen

display or 9-screen display.

When the QUAD button is pressed, the screen switches to

4-screen display, and the 4-screen display changes (1 – 4, 5 – 8,

9 – 12, 13 – 16) each time the QUAD button is then pressed. The

indicator illuminates to match the 4-screen display.

•

For the DSR-3009 model, the 4-screen display changes each

time the QUAD button is pressed (1 – 4, 5 – 8, 9 – 3).

Multiple display button and indicator (MULTI)

This button lets you switch the display to a 16-screen display or

9-screen display while monitoring is being carried out using the

single-screen or 4-screen display.

When the MULTI button is pressed, the 9-screen display or

16-screen display appears, and the split-screen display then

changes each time the button is pressed again.

The indicator illuminates, but turns off when any other screen

switching operations are carried out.

•

For the DSR-3009 model, a 9-screen display will appear. The

16-screen display is not available.

Monitor 2 setting button (MON2)

If this button is pressed while a monitor is connected to the MON2

connector at the rear of the digital video recorder, the monitor 2

output status can be changed. The default setting is for automatic

switching display. If a camera select button is pressed, images

from the selected camera can be displayed. The indicator

illuminates while monitoring is in progress.

Plus display button and indicator (PLUS)

This button lets you display a specified image in the lower-right

quarter of the screen area (6-screen display or 13-screen display).

When the PLUS button is pressed, the lower-right quarter of the

screen is displayed and the indicator flashes. If you press the

camera select button for the images required, those images

appear in the quarter screen. The following operations can be

carried out when this quarter screen is being displayed.

•

If the MULTI button is pressed, the screen changes to a

6-screen display or 13-screen display. The image in the quarter

screen remains unchanged.

(For the DSR-3009 model, only the 6-screen display is

available.)

•

If the SEQUENCE button is pressed, the SEQUENCE indicator

flashes and the quarter screen automatically changes. The

automatic screen switching speed can be set using the menu

screen. (See page 82.)

•

If you press the PLUS button twice during playback, the

camera images and the playback images are displayed.

12345678

MULTI

EXIT/OSD

ZOOM

SEQUENCE

COPY

SHUTTLE LOCK

JOG

SHUTTLE

TIMER

PLAY/STOP

STILL

REC/STOP

POWER FULL

ALARM FULL

LOCK ALARM

PLUS

QUAD

MON2

12 34 5 78 KLGHOPS

I9F6JNMQR

(DSR-3009)

ALARM

English

1 2 3 4 5 6 7 8 9 10 11 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Sanyo DSR-3016 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto DVR Sanyo DSR-3016