Sanyo PLC-ZM5000L Bedienungshandbuch PDF herunterladen (Seite 23)

Connect the projector’s AC power cord into an AC

outlet. The LAMP indicator lights red and the POWER

indicator lights green.

Press the ON/STAND-BY button on the side control

or the ON button on the remote control. The LAMP

indicator dims and the cooling fans start to operate.

The preparation display appears on the screen and

the countdown starts.

The preparation display will disappear

after 30 seconds.

After the countdown, the input source that was

selected the last time and the Lamp control status icon

(see page 57) appear on the screen.

Selected Input Source and Lamp control

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

Note:

 •TheLampreplacementiconandthe

FilterreplacementortheFiltercartridge

replacementiconmayappearonthe

screendependingontheusagestateof

theprojector.

 •Whenthefiltercartridgereplacement

iconkeepsappearingonthescreen

atturningontheprojectorforsome

timeandnoactionistakentoreplace

thefiltercartridge,theprojectorwillbe

automaticallyshutdownin3minutes

afterturningontoprotecttheprojector.

(pp.66-68,81)

 •WhenthePictureinPicturefunctionis

settoUser 1-5,User1-5,Inputsource,

Lampcontrolstatus,Lampreplacement

iconandFilterwarningiconwillappear

onthescreenfor10seconds.

Basic Operation

(See page 57 for Lamp control status.)

Lamp control status

If the projector is locked with a PIN code, PIN code

input dialog box will appear.

Note:

 •WhentheLogoselectfunctionissettoOff,thelogowill

notbeshownonthescreen(p.52).

 •WhenCountdown off orOffisselectedintheDisplay

function,thecountdownwillnotbeshownonthescreen

(p.52).

 •WhentheInputbuttonfunctionissettoMode 3,the

inputsignalwillbesearchedautomatically(p.51).

 •IfyoupresstheON/STAND-BYbuttonontheside

controlortheremotecontrolduringthecountdown

period,youcanskipthecountdownandgotothenormal

operations.Inthiscase,however,thebrightnessofthe

imageneedssometimetostabilizeafterturningonthe

projector.Thedisplaymayflickerafterturningonthe

lampforthecharacteristicsofthelamp.Thisisnormal

operationandnotamalfunction.

After the OK icon disappears, you can

operate the projector.

PIN Code Input Dialog Box

Note:

 •IfthePINcodenumberisnotentered

withinthreeminutesafterthePINcode

dialogboxappears,theprojectorwillbe

turnedoffautomatically.

 •The"1234"issetastheinitialPINcode

atthefactory.

Enter a PIN code

Use the Point ▲▼ buttons on the side control or Number

buttons on the remote control to enter a number.

When using side control

Use the Point ▲▼ buttons on the side control to select a

number. Press the Point ► button to fix the number and

move the red frame pointer to the next box. The number

changes to . Repeat this step to complete entering a

four-digit number. After entering the four-digit number,

move the pointer to “Set”. Press the SELECT button so

that you can start to operate the projector.

When using remote control

Press the Number buttons on the remote control to enter

a number (p.14). When you complete entering a four-digit

number, the pointer moves to “Set”. Press the SELECT

button so that you can start to operate the projector.

If you fix an incorrect number, use the Point ◄ button to

move the pointer to the number you want to correct, and

then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the

number () will turn red for a moment. Enter the

correct PIN code all over again.

Turning On the Projector

Input 1

RGB(PC analog)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Sanyo PLC-ZM5000L Bedienungshandbuch Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Sanyo PLC-ZM5000L