Sanyo PLC-ZM5000L Bedienungshandbuch PDF herunterladen (Seite 55)

Change the Logo PIN code lock setting

Setting

Picture in Picture

Show the selected mode (Off/User 1-5) and its status

(Stored /Free/ Adj.). User 1 and User 2 have stored

default values. See page 30 for details.

User setting

P in P:

Provide the images of Main picture and Sub

picture at the ratio of Screen aspect in the Screen

Menu.

P by P:

Provide the images of Main picture and Sub

picture at the ratio of 4:3.

P in P/P by P

Selected

Mode

Status (Stored /

Free/ Adj.) of the

selected mode.

Main picture / Sub picture

Input

……

Select an input from Input 1-3.

Source

…

Select an input source. The display varies

depending on the selected input.

Size

………

Select the display size. Main picture can be

changed between 10 and 100%, and Sub

picture can be changed between 10 to 50% in

increments of 10%. When P by P is selected in

Mode, the projection size is fixed to 50%.

Position

…

Press the SELECT button at Position and the

display position setting screen appears.

Use the Point ▲▼◄► buttons to adjust the display

position of active frame indicated in white. The frame will

disappear after 10 seconds or when the SELECT button is

pressed.

Position Menu

Active frame

(White)

Center line

display

Selecting the Main picture or Sub picture

During Picture in Picture mode, and being undisplayed On

Screen Menu, press the SELECT button to select Main or

Sub picture. (A red frame will be displayed on the selected

picture.)

Switching Input and Source

When selecting Main picture or Sub picture, input and

source can be set by pressing the INPUT button on the

side control or INPUT 1/2/3 button on the remote control.

Operation on the On Screen Menu is not necessary.

Note:

•ThePictureinPicturefunctionis

notavailabledependingonthe

inputsignalsandtheselectedinput

terminals.RefertoList of Picture in

Picturefordetails.(p.89)

•Whentheinputsignal(s)is/are

incompatible,Xmarkwillbedisplayed

for10secondsontheMain/Sub

picture.

This function is used to project two images simultaneously

by placing a separate small sub screen within or next to the

main screen.

Use the Point ▲▼ buttons to select Picture in Picture and

then press the SELECT button to display a dialog box. You

can also display the dialog box by pressing and holding the

PIP button on the remote control for more than 3 seconds.

Only the sound from the source of Main picture is valid,

while the source of Sub picture cannot output the sound. ( In

P in P, the larger picture is main picture, and the smaller one

is sub picture; in P by P, the left picture is main picture, and

the right one is sub picture.)

Note:

•P by Pisnotavailablewhenthe4:3

functionisselectedinScreenaspect

(pp.44,50).

•WhenP by PisselectedineveryUser

1-5andthe4:3functionisselected

inScreenaspect,PIPbuttononthe

remotecontrolisnotavailable.Toset

Picture in Picture,selectDefault

(16:10)or16:9inScreenaspect

(pp.44,50).

•WhenPIP isselected,screenisnot

available.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Sanyo PLC-ZM5000L Bedienungshandbuch Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Sanyo PLC-ZM5000L