Sanyo PLC-ZM5000L Bedienungshandbuch PDF herunterladen (Seite 71)

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that

contains a small amount of non-abrasive camera lens

cleaner, or use a lens cleaning paper or commercially

available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive

cleaners, solvents, or other harsh chemicals might scratch

the surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning

cloth. When the cabinet is heavily soiled, use a small

amount of mild detergent and finish with a soft dry

cleaning cloth. Avoid using an excessive amount of

cleaner. Abrasive cleaners, solvents, or other harsh

chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in

an appropriate carrying case to protect from dust and

scratches.

Maintenance and Care

Cleaning the Projection Lens

Cleaning the Projector Cabinet

Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire

hazard may occur even after the AC power cord is unplugged because the temperature inside the projector

is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not

only by the flammable air spray but also by the cold air.

CAUTION

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 91 92

Keine Kommentare

Sanyo PLC-ZM5000L Bedienungshandbuch Seite 71